Induction heating equipment

select brand


SKF Maintenance and Lubrication Products

Fixed induction heater - EAZ series

The fixed size EAZ induction heaters are designed to safely and easily dismount cylindrical roller bearing inner rings, which are often mounted with a very tight interference fit. Heating the inner ring rapidly loosens the fit, as the shaft remains cool, enabling the ring to be...

Fixed induction heater - EAZ series

The fixed size EAZ induction heaters are designed to safely and easily dismount cylindrical roller bearing inner rings, which are often mounted with a very tight interference fit. Heating the inner ring rapidly loosens the fit, as the shaft remains cool, enabling the ring to be removed without causing damage to
the shaft or inner ring. With easy-to-use fixed size EAZ induction heaters, three minutes are usually enough time to professionally dismount cylindrical roller bearing inner rings or similar components.

- Control cabinets from SKF provide the necessary power to run fixed size EAZ heaters and are available with various voltages to operate EAZ heaters in almost any country. Special versions of the control cabinets are available that enable up to three EAZ heaters to be used simultaneously.
- In light section mills, rod wire mills or railway applications, EAZ heaters can often dismount cylindrical roller bearing inner rings with one or more rows of rollers or multiple inner rings at the same time.
- EAZ induction heaters can also be used to dismount non-bearing elements like sleeves or rings.

Portable induction heater / bearing - 4,5 kg | TMBH 1

This Portable induction heater, manufactured by SKF, has a weight of only 4.5 kg. It has a...

Portable induction heater / bearing - 4,5 kg | TMBH 1

This Portable induction heater, manufactured by SKF, has a weight of only 4.5 kg. It has a highly efficient heater that matches bearings with an inner diameter ranging from 20 to 100 mm and a max weight of 5 kg. It features a temperature and time control, and an automated demagnetization. It comes with a carrying case and has an operating voltage of 100240 V.

Bearing induction heater - max. 40 kg | TIH 030m

The SKF portable induction heater a small bearing heater with excellent heating capacity and design light weight compact compose TIH 030m portable, heater is equipped with thermal overheating protection...

Bearing induction heater - max. 40 kg | TIH 030m

The SKF portable induction heater a small bearing heater with excellent heating capacity and design light weight compact compose TIH 030m portable, heater is equipped with thermal overheating protection to reduce risk damage in induction coil and electronics. the induction heating system provides standard three yokes available in two executions: 230v/540-60Hz and 100-110V/50-60Hz and stand induction coil outside the heater's housing provide bearing to balancing heat up to 40 kg thus, temperature condition is equipped with time mode for steaming components exceeding bearings. further heater features are: automatic demagnetisation, capable of heating a 28 kg bearing in just 20 minutes, temperature mode pre-set at 110 degree Celsius to help prevent bearing over-heating.

Bearing induction heater - max. 120 kg | TIH 100m

The TIH 100m are SKF'S Medium induction heater built with high heating capacity of up to 120 kg bearing.

It is built with the induction coil placed outside...

Bearing induction heater - max. 120 kg | TIH 100m

The TIH 100m are SKF'S Medium induction heater built with high heating capacity of up to 120 kg bearing.

It is built with the induction coil placed outside...

Bearing induction heater - max. 300 kg | TIH 220m

The SKF Large induction heater has a 300kg bearing heating capacity. It can deliver rapid heating...

Bearing induction heater - max. 300 kg | TIH 220m

The SKF Large induction heater has a 300kg bearing heating capacity. It can deliver rapid heating to 220kg or 480lbs in just 20 minutes. This heater comprise 2 standard yokes that allow heating of bearings with bore diameter from 60mm or 2.3in. and max. weight of 300kg or 660lbs. Furthermore, this is offered in two variants namely 230 V/5060 Hz and 400460 V/5060 Hz.
Schaeffler Technologies GmbH & Co. KG

Bearing induction heater - +40°C ... +240°C

The Schaeffler induction heating devices HEATER is used for bearings with a mass of 1200 kg maximum. They have enhanced performance and safety compared to the previous models....

Bearing induction heater - +40°C ... +240°C

The Schaeffler induction heating devices HEATER is used for bearings with a mass of 1200 kg maximum. They have enhanced performance and safety compared to the previous models. They are also used for heating sealed and greased rolling bearings.
The HEATER 10 to HEATER300 are tabletop devices while the HEATER600 and HEATER1200 are standalone devices for larger rolling bearings. The HEATER300 is convertible into a mobile unit just by adding a few accessories. The range of delivery of the HEATER induction heating devices encompasses a basic setup for the initial applications. The rolling bearing that is to be heated is suspended on the ledge or positioned horizontally on the support rails.

Induction heater -

The FAG heating device, composed of an inductor and a generator, utilizes medium frequency technology. Through rapid and effective heating,...

Induction heater -

The FAG heating device, composed of an inductor and a generator, utilizes medium frequency technology. Through rapid and effective heating, the device facilitates mounting and dismounting of steel parts such as medium-sized to large rolling bearings and others. A flexible design or a fixed design for the inductor is available. Batch applications are best served by the fixed design. Repetitive work is facilitated by flexible inductors in conjunction with subframes. This heating device can be utilized in a broad variety of applications.
TIMKEN

Induction heater - VHIN series

The Timken's Induction Heater serves as a solution for various industrial applications. It is integrated with a controlled heating concept....

Induction heater - VHIN series

The Timken's Induction Heater serves as a solution for various industrial applications. It is integrated with a controlled heating concept. It comes with a microprocessor which enables a restrained power supply. It also has an automated demagnetization system and an automated temperature control. It is capable of expanding and heating rings, bearing, coupling and other comparable components.

The heater is manufactured and made in compliance with both of the European (CE) and the International (IEC) health and safety regulations.
{{item.name}}