Pinch valves

select brand


SIRSI METALLISATOR S.P.A.

Pinch valve / with double pneumatic actuator - DN 80 - 200, max. 3.5 bar | PA-2 TN 3022

The TN 3022 is a balanced valve which is accompanied by a double pneumatic actuator....

Pinch valve / with double pneumatic actuator - DN 80 - 200, max. 3.5 bar | PA-2 TN 3022

The TN 3022 is a balanced valve which is accompanied by a double pneumatic actuator. It can be used in conveying compressed air unto pneumatic cylinders. The balanced valve is equipped with pistons and cylinders which are made out of aluminum alloy. It comes in different versions varying on its application use.

Pinch valve / manual - DN 10 - 65, max. 10 bar | D TN 2014/B

The TN2014/B is a pinch valve with metric dimensions ranging from DIN 2532...

Pinch valve / manual - DN 10 - 65, max. 10 bar | D TN 2014/B

The TN2014/B is a pinch valve with metric dimensions ranging from DIN 2532 up to ND10. It comes with a abrasion-proof body which is made out of cast iron and aluminium materials. The valve is integrated with a single-acting mechanism. It is also equipped with synthetic elastomers flexible sleeves.

Pinch valve / manual - DN 10 - 65, max. 10 bar | SD TN 2014

The Sirsi Metallisator SD TN 2014 is a manual pinch...

Pinch valve / manual - DN 10 - 65, max. 10 bar | SD TN 2014

The Sirsi Metallisator SD TN 2014 is a manual pinch valve that integrates a single acting mechanism. Furthermore, it has a nominal diameter of 10 up to 65 and can exhibit a maximum pressure of up to 10 bar.

Pinch valve / manual - DN 65 - 250, max. 5 bar | C TN 2015/B

The C TN 2015/B is a pinch valve which is compliant from DIN 65 up to DN250....

Pinch valve / manual - DN 65 - 250, max. 5 bar | C TN 2015/B

The C TN 2015/B is a pinch valve which is compliant from DIN 65 up to DN250. It comes with an abrasion-proof body which is made of cast iron and aluminium materials. The valve is integrated with a double-acting mechanism. It is also equipped with synthetic elastomers flexible sleeves.

Pinch valve / manual - DN 65 - 250, max. 5 bar | SC TN 2015

This tool engineered by Sirsi Metallisator is...

Pinch valve / manual - DN 65 - 250, max. 5 bar | SC TN 2015

This tool engineered by Sirsi Metallisator is a manual pinch valve that features a double acting system. In addition, it operates with a maximum pressure of 5 bar with DN 65 to DN 250.
ASCO Numatics Sirai Srl.

Wedge solenoid valve

The Picn Solenoid Valves manufactured by SIRAI™ works unlike other series offered by SIRAI™. A solenoid operator carries the pinching device which then pinches or releases a tubing in soft silicon or different...

Wedge solenoid valve

The Picn Solenoid Valves manufactured by SIRAI™ works unlike other series offered by SIRAI™. A solenoid operator carries the pinching device which then pinches or releases a tubing in soft silicon or different kinds of materials that are soft. The liquid streams fastly in either course with minimal turbulence and dead spaces.

The Pinch Solenoid Valves can therefore handle any fluids compatible with its tubing material, securing them from any pollution and also extreme temperatures. Tubings installation and replacement are easy making the solenoid valves fit to be used for a vast range of application; especially for controlling physiological, medical and food fluids. Upon request, valves with typically closed or open 2/2 or 3/2 are available, along with the scaled-down version and latching models. All models are noise-free.
SEIM S.r.l.

Valve - 30 - 10 000 l/min | VMPI series

The VMPI series from Seim is a 3-way hydraulic directional control valve that...

Valve - 30 - 10 000 l/min | VMPI series

The VMPI series from Seim is a 3-way hydraulic directional control valve that is compatible with a wide variety of screw pumps.

This series offers a large selection of flow and operating ranges that can function in either two or three ways. It can easily be installed directly on a pump.
{{item.name}}