+7 (812) 645-08-06
Hydro-pneumatic cylinder - 50 - 500 mm, ISO 15552 | BRK series
This is a closed-loop hydraulic brake without its own power source.It is normally associated with an ISO 15552 pneumatic cylinder.
It consists of an oil-filled cylinder, one or more regulation valves and a
tank compensating for oil leaks.
It is available in two versions:
with regulation in piston rod extension, in retraction or both
SKIP valve (slow/fast) or STOP valve or both, with NC or NO control
After a certain operating time, the brake compensation tank needs to be
topped up. Refer to the minimum mark on the dipstick. With the piston rod
fully extended, the dipstick must project at least 15 mm from the tank cap.
Use only COMLUBE DEXRON ATF hydraulic oil. During the first few work
cycles, excess oil is ejected through a hole in the tank.|