Switches: position switches, safety switches...

select brand


CROUZET

Latching switch / solenoid / spindle - 83893

Crouzet 83893 plastic solenoid locking switch is used to monitor moving guards for machines with...

Latching switch / solenoid / spindle - 83893

Crouzet 83893 plastic solenoid locking switch is used to monitor moving guards for machines with...
Eaton BANNER ENGINEERING CORP.

Latching switch / safety - 30 mm | SI-MAG series

These magnet-style switches are compact so it is possible to conceal them. Their components are sealed to protect them from dirt and water, and they can handle misalignment better than...

Latching switch / safety - 30 mm | SI-MAG series

These magnet-style switches are compact so it is possible to conceal them. Their components are sealed to protect them from dirt and water, and they can handle misalignment better than mechanical switches. For a 30mm barrel-style or flat mounting, three housing styles are offered, and all models have one normally-closed and one normally-open actuator contact.

With these switches, sensing is not compromised from shifts in alignment or distance, and the risk of intentional defeat is lessened due to the coded magnets. There is added security too because the magnets have different polarizations, and the switches need to be used with GM-FA-10J or equivalent gate monitoring modules for safety applications.

Latching switch / spindle / solenoid - SI series

With the use of mechanical lock switches, harmful motion stops totally. It has two housing styles available based on voltage...

Latching switch / spindle / solenoid - SI series

With the use of mechanical lock switches, harmful motion stops totally. It has two housing styles available based on voltage and two locking mechanisms with energized solenoid release and lock with spring release. It also contains a wide-ranging solenoid voltages with rotating heads that requires little or no tools to adjust to one of four positions. Its in-line actuators are firm and bendable with the design that meets positive opening demands for safety interlocks.

Latching switch / spindle - IP67 | SI series

The SI Series has acutators that are automatically codified. To prevent deliberate alteration or interference, these...

Latching switch / spindle - IP67 | SI series

The SI Series has acutators that are automatically codified. To prevent deliberate alteration or interference, these actuators utilize two operating components independent of each other. The two styles of housing provide various contact compositions as they are offered in two sizes. To allow the actuator to take up to eight different positions, the head and top or side rotate. Design and safety are integrated into the creation of the SI Series.

Safety hinge switch - 0 - 180°

You can buy bearing hinged, rotating hinges and hinged levers for many needs....

Safety hinge switch - 0 - 180°

You can buy bearing hinged, rotating hinges and hinged levers for many needs. These use switching points that can be posted at any space at a 180-degree angle. This is a one-piece switch unit that works without risking alignment problems and can work without risking a separate actuator for a unit.

Latching switch / safety - SI-LM40MKx series

These mechanically coded actuators can minimize intentional tampering or defeat using two independent operating elements. Suitable in rugged...

Latching switch / safety - SI-LM40MKx series

These mechanically coded actuators can minimize intentional tampering or defeat using two independent operating elements. Suitable in rugged environments without much space, compact metal style switches fit in well.

Rigid and flexible in-line actuators are available for models SI-LM40MKH. Trumpet style actuators are included in models SI-LM40MKV.

The rotating head can be adjusted to four positions with few or no tools. The design of these actuators meets positive opening stipulations for safety interlocks.
{{item.name}}