+7 (812) 645-08-06
Spectrum analyzer / signal / telecommunication - max. 50 GHz | N9070A
Many digital communications and radar applications today require demodulation and analysis of wideband signals in the microwave region. While this task can be accomplished using a modern wideband oscilloscope to directly digitize microwave signals for analysis, the PXA signal analyzer also can be used as a cost-effective downconverter when used with lower sampling rate digitizers or digital oscilloscopes.The N9070A wideband signal analysis solution takes advantage of the PXAs wide IF output, a high dynamic range oscilloscope, and the powerful 89600 VSA software to deliver a wideband high-dynamic range signal analysis solution at an affordable price. In the past, when using a signal analyzer as a downconverter, a source would be required to do a calibration at the specific center frequency the test was being performed at. This was expensive and making a measurement could take a considerable amount of time. The PXA now offers exportable correction data and when combined with the characterized IF data, allows for an accurate measurement throughout the frequency range of the analyzer. This simplifies the wideband measurement, similar to running the VSA inside a standalone PXA. The corrections span over 1 GHz and allow the VSA to run inside the oscilloscope. The VSA can be used to characterize and troubleshoot over 75 signal formats, both custom and standard based, or analyze pulsed signals for phase linearity or modulation on pulse.