EMC/EMI testing rigs

select brand


Thermo Scientific - Environmental and Process

EMI/EMC testing machine - EMCPro™ Plus

Thermo Scientific™ EMCPro Plus is a multi-capacity and economical EMC immunity test system acknowledging a wide-ranging...

EMI/EMC testing machine - EMCPro™ Plus

Thermo Scientific™ EMCPro Plus is a multi-capacity and economical EMC immunity test system acknowledging a wide-ranging test function. It can be constructed for testing to one or any combination of IEC basic immunity requirements. It's the only tester that can monitor surge voltage and current at output terminals and at output of the coupling unit, automatically switching connections based on coupling mode compared to measuring at the generator which may cause errors.
ETS Lindgren

EMI/EMC testing machine / modular

ETS-LINDGREN'S EMCenter is a modular RF platform consisting...

EMI/EMC testing machine / modular

ETS-LINDGREN'S EMCenter is a modular RF platform consisting of an integrated micro-controller, modular chassis, and a selection of optional plug-in card modules. It can be used to perform a variety of RF measurement applications.

Test system - 8 - 64 MHz | MF-130D

Description

With the possibility of generating eight frequencies, the engineer is able to check the shielding effectiveness very quickly. The measurement can be done at four frequencies: 8 MHz, 16 MHz, 32 MHz and 64 MHz. The measurements can be performed according to the following standards: MIL-STD-285 NSA 65-6 IEEE STD-299 MF-130D consists of portable, NiCd battery operated transmitter...

Test system - 8 - 64 MHz | MF-130D

Description

With the possibility of generating eight frequencies, the engineer is able to check the shielding effectiveness very quickly. The measurement can be done at four frequencies: 8 MHz, 16 MHz, 32 MHz and 64 MHz. The measurements can be performed according to the following standards: MIL-STD-285 NSA 65-6 IEEE STD-299 MF-130D consists of portable, NiCd battery operated transmitter and receiver. Frequency and attenuation calibration is automatically operated by a microprocessor. The receiver is equipped with an LCD-display which shows the attenuation in dB at the normal operational mode. An alarm sound is heard when the attenuation is less than the selected level at the preset limit mode.
Saving and downloading the measured data You can save 63 attenuation levels at each frequency. You can download these saved values to a computer through a serial (RS-232) connection. The MF-130D Attenuation Meter set is provided with two diskettes. These diskettes are for downloading the measuring information into a computer. One diskette is for a Windows 3.1x operating system and the other is for a Windows 95 operating system.

Measuring magnetic attenuation according to NSA 65-6 / IEEE STD-299: Place the receiver and the transmitter as shown in the figure above at the point to be measured with the receiver inside the enclosure and the transmitter outside. The attenuation value may now be read from the meter. Measuring magnetic attenuation according to MIL-STD-285: Place the receiver and the transmitter as shown in the figure above. Turn the antenna of the receiver and the transmitter to find out the minimum attenuation reading.

MIMO performance tester - AMS-8700

Key Features

Suitable for LTE, WiMAX, and 802.11n MIMO Testing
Suitable...

MIMO performance tester - AMS-8700

Key Features

Suitable for LTE, WiMAX, and 802.11n MIMO Testing
Suitable for Evaluation of Receive Diversity
Complete RF Environment Simulation
Supports Single Cluster, Multiple Cluster, and Uniform Models
Supports Variable Angles of Arrival, Doppler, and Delay Spread
Patent Pending Technology

Test system - EMCenter™

Key Features

Modular Platform for Making RF Measurements
Reduces...

Test system - EMCenter™

Key Features

Modular Platform for Making RF Measurements
Reduces Test System Complexity
Includes Backplane, Power, and TFT Touch Screen Control
Accepts up to 7 Optional Plug-n-Play Instrument Card Modules
Supported by Popular RF Test Automation Software
Rainford EMC Systems

EMC testing: turntable/antenna mast controller

To compliment our superb range of anechoic chambers and shielded rooms...

EMC testing: turntable/antenna mast controller

To compliment our superb range of anechoic chambers and shielded rooms Rainford EMC Systems also has a vast array of accessories such as:

Masts
Turntables
Positioners
Controllers
Test tables
Antenna winches
Dynamometers
{{item.name}}