Anechoic chambers, faraday cages, EMC/EMI test cells

select brand


JACQUES DUBOIS

Shielded cabinet

Cage made with metal wire mesh on panels (CuSn 2 wires + T.C.S. 2 wires) soldered together, assembled...

Shielded cabinet

Cage made with metal wire mesh on panels (CuSn 2 wires + T.C.S. 2 wires) soldered together, assembled on all
6 faces.
Combination on threaded wood structure with plywood for low protection. Antistatic floor covering, floor made
with fibreboard. Solid wood door, dimensions : 830 x 2050 mm. Brass filter panel, dimension 400 x 400 mm, wave
guide and power supply filter.
ETS Lindgren

EMC test chamber - FACT™

ETS-Lindgren's FACT™ 3 Chambers offer semi-anechoic...

EMC test chamber - FACT™

ETS-Lindgren's FACT™ 3 Chambers offer semi-anechoic radiated emissions (RE) and fully anechoic radiated immunity (RI) compliance test capability for most international EMC compliance regulations.

EMC test chamber / anechoic - SpaceSaver™

A semi-anechoic chamber, the SpaceSaver...

EMC test chamber / anechoic - SpaceSaver™

A semi-anechoic chamber, the SpaceSaver 26H is designed to perform ANSI C63.4/CISPR 16-1-4 and IEC 61000-4-3 compliant radiated immunity measurements.

EMC test chamber - 80 MHz - 40 GHz

ETS-LINDGRENS MIL-STD-461E/F CHAMBER is designed for testing in accordance with the...

EMC test chamber - 80 MHz - 40 GHz

ETS-LINDGRENS MIL-STD-461E/F CHAMBER is designed for testing in accordance with the military standard. The chambers shell is constructed with Series 81TM modular cell-type shielding panels. Interior end walls, portions of the sidewalls and ceiling are lined in the manner required by MIL-STD-461E/F, using EMC-24PCL absorber.

Reverberation chamber

ETS-Lindgren's Tuners are made of large aluminum reflecting...

Reverberation chamber

ETS-Lindgren's Tuners are made of large aluminum reflecting sheets supported on either a rigid box (truss)frame or a single spine and designed to provide the efficient reflecting surfaces necessary for use in a RF reverberation chamber.

RF immunity test chamber / shielded

ETS-Lindgren is the world's largest and most experienced supplier of shielding...

RF immunity test chamber / shielded

ETS-Lindgren is the world's largest and most experienced supplier of shielding solutions for electromagnetic and radio frequency interference (EMI/RFI). We have installed over 25,000 successful shielded enclosures within a variety of industrial, governmental, and medical environments around the world.
Panashield

EMC test chamber / compact - max. 3 m

Panashield Compact Anechoic Chambers are available in various sizes for 3 meter electromagnetic compatibility testing. The range starts with a small chamber for both pre- compliant /pre scan radiated immunity (RI) testing and radiated...

EMC test chamber / compact - max. 3 m

Panashield Compact Anechoic Chambers are available in various sizes for 3 meter electromagnetic compatibility testing. The range starts with a small chamber for both pre- compliant /pre scan radiated immunity (RI) testing and radiated emissions (RE) testing and sizes increase to larger chambers for full compliant radiated immunity testing and pre compliant radiated emissions testing. The CAC is economical in both cost and the floor space it requires.

The chambers are constructed using the Panabolt modular panel RF shielding system. Absorber lining may be a combination of either pyramidal and ferrite absorber, ferrite absorber only or ferrite and hybrid absorber to extend the frequency range to at least 18 GHz.

Typical models are detailed below but different chamber sizes can be accommodated to suit the client's test object size, available floor area and floor to ceiling height.

RF immunity test chamber / anechoic - max. 3 m

Panashield's 3 meter EMC anechoic chamber provides a test facility for performing full compliance radiated emissions and radiated immunity...

RF immunity test chamber / anechoic - max. 3 m

Panashield's 3 meter EMC anechoic chamber provides a test facility for performing full compliance radiated emissions and radiated immunity testing to various international standards. This proven design has excellent measured results well within the required +/-4 dB NSA levels specified in ANSI C63.4 and EN50147 part 2 (emissions) and is also fully compliant for EN61000-4-3 (immunity). The chambers are self-supporting and constructed using the versatile Panabolt modular panel RF shielding system and provide a high level of shielding integrity.

RF immunity test chamber / anechoic - max. 5 m

Panashield's 5 meter EMC anechoic chamber provides full compliance test facility for performing radiated...

RF immunity test chamber / anechoic - max. 5 m

Panashield's 5 meter EMC anechoic chamber provides full compliance test facility for performing radiated emissions measurements at test distances up to 5 meter. Normalised Site Attenuation (NSA) of better than +/-4dB is attained within a 2 meter diameter quiet zone at a 5 meter test distance and 3 meter diameter quiet zone at a 3 meter test distance (measured in accordance with EN 50147-2/ANSI C63.4).

RF immunity test chamber / anechoic

An Anechoic Chamber generally consists of an RF shielded room which is either partially or fully lined with RF absorber material. It is used to perform several types of testing and measurements. Panashield chambers are typically constructed from the Panabolt modular shielding system.

EMC anechoic test chambers are used...

RF immunity test chamber / anechoic

An Anechoic Chamber generally consists of an RF shielded room which is either partially or fully lined with RF absorber material. It is used to perform several types of testing and measurements. Panashield chambers are typically constructed from the Panabolt modular shielding system.

EMC anechoic test chambers are used...
{{item.name}}