+7 (812) 645-08-06
Multi-gas analyzers
select brand
Multi-gas analyzer / infrared - 230 V, 20 - 100 l/h
This infrared gas analyzer is capable of extremely small measuring ranges and features selective...
Multi-gas analyzer / infrared - 230 V, 20 - 100 l/h
This infrared gas analyzer is capable of extremely small measuring ranges and features selective measurements for up to four gas components. It is equipped with components that have been fully tested in accordance with German TA-Luft and 13./17. BImSchV. It's possible applications include room air monitoring for CO, CO2 and difluorodichloromethane.
Multi-gas analyzer / FT-IR - MATRIX MG
The Matrix MG is a compact and lightweight instrument designed for Mid-Infrared gas and vapor phase spectroscopy. It is a highly stable and sensitive equipment that...
Multi-gas analyzer / FT-IR - MATRIX MG
The Matrix MG is a compact and lightweight instrument designed for Mid-Infrared gas and vapor phase spectroscopy. It is a highly stable and sensitive equipment that is very easy-to-use and requires low maintenance. Its design is based on the recognized MATRIX-F spectrometer that uses the RockSolid interferometer which makes it the best solution for gas quality control in process and environmental research. It also features a modular system that is perfect even for extreme process environments. It utilizes an Ethernet interface, using TCP/IP protocol and an embedded HTML server for optimal performance and has >400 compound calibration in its database.
Multi-gas analyzer / extractive - max. 100 ppm | ULTRAMAT 6
The Ultramat 6 series is extremely reliable, and has been developed for use in demanding environments. This innovative unit has been adapted for use as a measuring device. It...
Multi-gas analyzer / extractive - max. 100 ppm | ULTRAMAT 6
The Ultramat 6 series is extremely reliable, and has been developed for use in demanding environments. This innovative unit has been adapted for use as a measuring device. It is easy to use, and the high quality standards has been established by modern electronics. The integrated optical couplers and optical filters combine to increase selectivity, allowing the unit to be used for the measurement of a variety of substances including complex gas mixtures. It can also measure lower concentrations and lower detection limits. The The ULTRAMAT 6E model is capable of measuring up to four infrared components in a single unit, while the The ULTRAMAT 6F can measure up to two infrared components.
Multi-gas analyzer / extractive - max. 500 ppm | ULTRAMAT 23
The ULTRAMAT 23 is highly innovative and space-saving due to its multi-component structure with NDIR technology for electrochemical cells of O2 and H2S measurement (optional) and...
Multi-gas analyzer / extractive - max. 500 ppm | ULTRAMAT 23
The ULTRAMAT 23 is highly innovative and space-saving due to its multi-component structure with NDIR technology for electrochemical cells of O2 and H2S measurement (optional) and for a maximum of 3 IR active constituents measurement. Some benefits of using this device are high selectivity due to multi-layer detectors, menu-assisted operation in plain text, open interface architecture (RS 485, RS 232; PROFIBUS, SIPROM GA): streamlined process integration; remote control and operation, cleanable sample cells which are cost-saving via reusing after contamination, and is very practical because of the eliminated need for calibration gases (AUTOCAL with ambient air, dependent on the measuring component).
Multi-gas analyzer / thermal conductivity - max. 10 % | CALOMAT 62
The CALOMAT 62 by Siemens is a thermal conductivity analyzer ideal for corrosive gas applications. This analyzer allows a direct measurement of gas component concentration even in aggressive environments....
Multi-gas analyzer / thermal conductivity - max. 10 % | CALOMAT 62
The CALOMAT 62 by Siemens is a thermal conductivity analyzer ideal for corrosive gas applications. This analyzer allows a direct measurement of gas component concentration even in aggressive environments. Depending on the use and the gas to be analysed, the CALOMAT 62 serves as a powerful device with multiple application possibilities. The measuring principle behind this analyzer is based on a thermal conductivity measurement, a physical factor different for each gas. A measuring bridge determines the signal, formed between two electrical resistances both in the measuring gas channel and the reference cell. This device comes in a compact version and can also come in an IP65 standard, rinse-able version with gas-proof separation of the analyser and electronics.
Multi-gas analyzer / in-situ - LDS 6
Diode laser gas analyzer LDS 6 helps in monitoring the process of gas analytics and continuous monitoring. It modifies future operations in this process. The major benefit of this...
Multi-gas analyzer / in-situ - LDS 6
Diode laser gas analyzer LDS 6 helps in monitoring the process of gas analytics and continuous monitoring. It modifies future operations in this process. The major benefit of this approach is a simple fact that measurement is performed non-intrusively in real-time without any delay due to the gas conditioning. The disturbance due to gas sampling is ignored completely giving rise to accurate measurement.
The complete benefits highly depend on the separation process. In almost all the situations, this method leads to effortless installation and higher efficiency. It is easy to maintain. The profitability and compatibility of the processes can be increased due to the fast in-situ measuring.
The complete benefits highly depend on the separation process. In almost all the situations, this method leads to effortless installation and higher efficiency. It is easy to maintain. The profitability and compatibility of the processes can be increased due to the fast in-situ measuring.
Multi-gas analyzer / in-situ - max. 100 ppmv | SITRANS SL
The SITRANS SL diode laser gas analyzer manufactured by Siemens attributes a fundamental based measurement regarding the absorption of the...
Multi-gas analyzer / in-situ - max. 100 ppmv | SITRANS SL
The SITRANS SL diode laser gas analyzer manufactured by Siemens attributes a fundamental based measurement regarding the absorption of the specific light on various gas elements. To continue, the product is designed for feasible performance in a difficult environmental conditions with its transmitter and receiver intended for a direct mounting on the operation without the need of requirement of sampling processes. Furthermore, 2 main modules of the product consists of a hardware for the operation of measurement signal to a concentration value.