Components for modular structures

select brand


Ganter

Cross tube connector / aluminium - GN 132

The clamping bores of the two-way connector clamps GN 132 are mechanically machined and...

Cross tube connector / aluminium - GN 132

The clamping bores of the two-way connector clamps GN 132 are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.

The standard clamping screws are socket cap screws DIN 912. They can be replaced by adjustable clamping levers GN 911 (article code see table of dimensions).

Cross tube connector / stainless steel - GN 132.5

The clamping bores of the two-way connector clamps GN 132.5 are mechanically machined and...

Cross tube connector / stainless steel - GN 132.5

The clamping bores of the two-way connector clamps GN 132.5 are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.

The shape of the clamping screws / nuts prevents the formation of wetness due to dammed-up water. The designs with sealing (Type B) also seals bore holes and threads.

Cross tube connector / aluminium - GN 133

The clamping bores of the two-way connector clamps GN 133 are mechanically machined and...

Cross tube connector / aluminium - GN 133

The clamping bores of the two-way connector clamps GN 133 are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.

The standard clamping screws are socket cap screws DIN 912. They can be replaced by adjustable clamping levers GN 911 (article code see table of dimensions).

Aluminium tube connector / base piece - GN 145

The clamping bores of the flanged connector clamps GN 145 are mechanically machined and designed for construction...

Aluminium tube connector / base piece - GN 145

The clamping bores of the flanged connector clamps GN 145 are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.

The standard clamping screws are socket cap screws DIN 912. They can be replaced by adjustable clamping levers GN 911 (article code see table of dimensions).

Flanged connector clamps GN 145 are also suitable for mounting on profile systems.

Aluminium tube connector - GN 146

The clamping bores of the flanged connector clamps GN 146 are mechanically machined and...

Aluminium tube connector - GN 146

The clamping bores of the flanged connector clamps GN 146 are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.

The standard clamping screws are socket cap screws DIN 912. They can be replaced by adjustable clamping levers GN 911 (article code see table of dimensions).
item Industrietechnik GmbH

Tube connector: center bracket - 0.0.662.05

When the end of the profile is not quite the end of the frame, its time to use Butt Fastener...

Tube connector: center bracket - 0.0.662.05

When the end of the profile is not quite the end of the frame, its time to use Butt Fastener...
ELESA

Profile assembly angle bracket - SQT

The SQT series angles for profile structures are made of polyamide-based (PA) technopolymer material that is reinforced with glass fiber. These robust, sturdy, compact, rigid and stable angles are...

Profile assembly angle bracket - SQT

The SQT series angles for profile structures are made of polyamide-based (PA) technopolymer material that is reinforced with glass fiber. These robust, sturdy, compact, rigid and stable angles are resistant to various chemicals, oils, solvents and greases employed in various equipment pieces.

They have a grey, matte-finished outer surface. The SQT angles are used for the easy assembly of aluminum profile safety structures that can be used to guard various equipment pieces and machines. Variants are available to users in a manner that differs in slots and holes, for example, with two slots for M8-screws (SQT-A), two holes for M8-screws and centering slides (SQT-F), as well as with a slot and hole for M8-screws and centering slides (SQT-AF), as dictated by the buyer.

Profile assembly angle bracket - SQMA

Aluminium.

Standard executions
- SQMA-B-MT: natural aluminium, matte finish.
- SQMA-B-SW: aluminium, epoxy resin coating, RAL 9005 black colour, matte finish.
- SQMA-B-SR: aluminium, epoxy...

Profile assembly angle bracket - SQMA

Aluminium.

Standard executions
- SQMA-B-MT: natural aluminium, matte finish.
- SQMA-B-SW: aluminium, epoxy resin coating, RAL 9005 black colour, matte finish.
- SQMA-B-SR: aluminium, epoxy resin coating, RAL 9006 grey colour, matte finish.

Cover
Glass-fibre reinforced polyamide-based technopolymer (PA), matte finish, black colour. Resistant to solvents, oils, greases and other chemical agents.

Screws, nuts and fixing inserts
Zinc-plated steel.

Special executions on request
Angles without cover, screws, nuts and fixing inserts (SQMA-A).

Features and applications
SQMA. fixing angles are particularly suitable for the assembly, in a very easy way, of structures made out of aluminium profiles (dimensions 30/40/45 mm) for safety protections of machines and equipment.

Profile assembly angle bracket - SQMF

The innovative SQMF Angles made for profile structures is a highly robust unit made mostly of aluminum with a cover made from glass-fiber reinforced polyamide-based...

Profile assembly angle bracket - SQMF

The innovative SQMF Angles made for profile structures is a highly robust unit made mostly of aluminum with a cover made from glass-fiber reinforced polyamide-based technopolymer (PA). It has a matte finish and black color with screws and fixing inserts made from strong zinc-plated steel. Its built is made to resist solvents and chemical agents making it ideal for applications even in harsh conditions. It aims to ensure safety and protection of machines and equipment through convenient fixing angles assembly for structures made of aluminum profiles with 30/40 mm dimensions. It is also available without cover, screws and fixing inserts.

Cross tube connector - GN 131

The GN 131 range of two-way connecting clamps are made with aluminum. These two-way connecting clamps are designed with assembly holes that allow them to be paired...

Cross tube connector - GN 131

The GN 131 range of two-way connecting clamps are made with aluminum. These two-way connecting clamps are designed with assembly holes that allow them to be paired with GN 990 tubes. Its d3 clamping screws may be easily replaced into the clamp using a GN 911 clamping kit.

The GN 131 is available in four standard models, namely, the BL-1, BL-2, SW-1 and SW-2.

The BL models are made with matte-finished aluminum, while the SW models are constructed with matte black epoxy resin coating. Each model has features that are unique to these specific products. Different holes combinations may also be requested.

Cross tube connector - GN 133

The GN 133 range of two-way connecting clamps are made with aluminum. These two-way connecting clamps are designed with assembly holes that allow them to be...

Cross tube connector - GN 133

The GN 133 range of two-way connecting clamps are made with aluminum. These two-way connecting clamps are designed with assembly holes that allow them to be paired with GN 900 tubes. The GN 133's d3 clamping screws may be easily replaced into the clamp using a GN 911 clamping kit.

The GN 133 is available in four standard models: the BL-1, BL-2, SW-1 and SW-2. The BL models are made with matte-finished aluminum, while the SW models are constructed with matte black epoxy resin coating. Each model has features that are unique to these specific products. Different holes combinations may be requested.
{{item.name}}