Gears, racks

select brand


Nexen Group, Inc.

Linear rack and roller pinion drive / stainless steel - RPS

The RPS rack uses a modular concept with only two standard factory lengths per size that are joined to create runs of any length. Full lengths are around one meter in length and half-lengths around ó meter in length depending on tooth pitch. Shorter rack segments can be made by cutting the rack. Featuring positional accuracy up to 30, 50 and 80 microns, the RPS...

Linear rack and roller pinion drive / stainless steel - RPS

The RPS rack uses a modular concept with only two standard factory lengths per size that are joined to create runs of any length. Full lengths are around one meter in length and half-lengths around ó meter in length depending on tooth pitch. Shorter rack segments can be made by cutting the rack. Featuring positional accuracy up to 30, 50 and 80 microns, the RPS...

Linear rack and roller pinion drive / plastic - RPS series

The Roller Pinion System (RPS) is a unique drive system which is based on an innovative pinion. It consists of a unique tooth profile and...

Linear rack and roller pinion drive / plastic - RPS series

The Roller Pinion System (RPS) is a unique drive system which is based on an innovative pinion. It consists of a unique tooth profile and bearing-supported rollers. The drive system offer exceptionally high speeds and positional accuracy, low-velocity ripple, unlimited length, high rigidity, hardly any cumulative error, near-zero backlash, low noise and maintenance, 99% efficiency, a long life and it is resistant to corrosion.

Much higher levels of performance can be achieved and new machine design possibilities have been opened up.

Gear wheel - i= 3:1 - 37.5:1 | RPG series

Nexen Roller Pinion Gear system (RPG) uses a unique pinion, which includes rollers supported by bearings and an exceptional tooth profile. The innovative drive system delivers...

Gear wheel - i= 3:1 - 37.5:1 | RPG series

Nexen Roller Pinion Gear system (RPG) uses a unique pinion, which includes rollers supported by bearings and an exceptional tooth profile. The innovative drive system delivers improved positional precision and minimum backlash. Cumulative error is almost completely eliminated.

RPG provides provides unlimited length and very low-velocity ripple. It provides exceptionally high speeds and stiffness. The low-noise and durable system provides high resistance to corrosion and is easy to maintain. It offers 99% efficiency.

With the RPG, a range of new prospects of improvements in machine designs are made available. It enables much superior performance levels.

Gear wheel - 09.1904.0801

The Gear wheel HTD-8M-20, designed for use with 20 m width timing belts,...

Gear wheel - 09.1904.0801

The Gear wheel HTD-8M-20, designed for use with 20 m width timing belts, has a cast iron, gunmetal finish disk and a galvanized-steel flanged wheel. It has an HTD profile, 8 mm pitch, and is drilled for TAPER-LOCK bushings. Steel is used for gear wheels with up to 36 teeth.

Straight-toothed gear

The Spur Gear, manufactured by Güdel, is designed...

Straight-toothed gear

The Spur Gear, manufactured by Güdel, is designed...

Rack and pinion

All of the modules are based on high-quality components. The precision guide rails and drive components...

Rack and pinion

All of the modules are based on high-quality components. The precision guide rails and drive components...

Bevel gear

The Bevel Gear series is a plastic and metal gears manufactured by GUDEL. This bevel gears range includes a huge variants...

Bevel gear

The Bevel Gear series is a plastic and metal gears manufactured by GUDEL. This bevel gears range includes a huge variants of materials, load limits and features. The gears is produced from steel, stainless steel, and graphite cast iron materials.

It is also made from brass zinc and plastic substances with hardened and ground injection mauled. The bevel gears has a 3 classification, the gears for low loads, for medium loads and high loads.
{{item.name}}