+7 (812) 645-08-06
Circular saws
select brand
Vortex flow meter - OPTISWIRL 4200
The all-in-one solution
OPTISWIRL 4200 Vortex Flowmeter
:: Integrated pressure and temperature compensation
:: Development acc. to IEC 61508 edition 2, for SIL2
:: Gross and net heat measurement for hot water and steam
:: Comprehensive communication options
:: Remote version with field housing converter with connection cable up to 50 m / 164 ft
Already...
OPTISWIRL 4200 Vortex Flowmeter
:: Integrated pressure and temperature compensation
:: Development acc. to IEC 61508 edition 2, for SIL2
:: Gross and net heat measurement for hot water and steam
:: Comprehensive communication options
:: Remote version with field housing converter with connection cable up to 50 m / 164 ft
Already...
Vortex flow meter - OPTISWIRL 4200
The all-in-one solution
OPTISWIRL 4200 Vortex Flowmeter
:: Integrated pressure and temperature compensation
:: Development acc. to IEC 61508 edition 2, for SIL2
:: Gross and net heat measurement for hot water and steam
:: Comprehensive communication options
:: Remote version with field housing converter with connection cable up to 50 m / 164 ft
Already...
OPTISWIRL 4200 Vortex Flowmeter
:: Integrated pressure and temperature compensation
:: Development acc. to IEC 61508 edition 2, for SIL2
:: Gross and net heat measurement for hot water and steam
:: Comprehensive communication options
:: Remote version with field housing converter with connection cable up to 50 m / 164 ft
Already...
Carbide blade saw / circular - ø 460 - 1 300 mm | SP series
The Carbide disc saws – SP series is constructed for cutting of pipes with its carbide tipped blades.
This is distinguished as a really constructively hard machine with...
This is distinguished as a really constructively hard machine with...
Carbide blade saw / circular - ø 460 - 1 300 mm | SP series
The Carbide disc saws – SP series is constructed for cutting of pipes with its carbide tipped blades.
This is distinguished as a really constructively hard machine with high structural stiffness. The life of its blade is guaranteed by the modulation which comes off automatically in cutting parameters on the entire operation cycle. Specifically, the implementation of the certain adjustments of the encompassing speed of the blade and of the head feed in times of going in and going out of the pipe in which the metal section occupied by the blade is more huge than the center which has minimal thickness, will make the operation time be lessened.
The sawing machines are equipped with 3 pairs of steel.
This is distinguished as a really constructively hard machine with high structural stiffness. The life of its blade is guaranteed by the modulation which comes off automatically in cutting parameters on the entire operation cycle. Specifically, the implementation of the certain adjustments of the encompassing speed of the blade and of the head feed in times of going in and going out of the pipe in which the metal section occupied by the blade is more huge than the center which has minimal thickness, will make the operation time be lessened.
The sawing machines are equipped with 3 pairs of steel.
Carbide blade saw / circular - ø 360 - 2 200 mm | S series
The Carbide disc saws – S series provides a simple and rapid set-up pushing through the boundaries of traditional and conventional disc or band saw...
Carbide blade saw / circular - ø 360 - 2 200 mm | S series
The Carbide disc saws – S series provides a simple and rapid set-up pushing through the boundaries of traditional and conventional disc or band saw as it adds productivity output when it comes to rapidness, precision, quality of sawing and letting a deduction in scrap production that lead to eliminating costs. The disc saws are 50 mm in diameter and 100 mm long equating into 400pcs/h while the scraps bars diameter ranges up to 130 mm or 2,7 mm. Its cost at each cut is 50% less than the cost using reground blades. The Carbide disc saws is good in cutting as it cut aligned, flat without flash.
Circular saw / hand / pneumatic - max. 0.3 kW | LCS 10
The LCS 10 Pneumatic saw consists of a 62 teeth cutter blade...
Circular saw / hand / pneumatic - max. 0.3 kW | LCS 10
The LCS 10 Pneumatic saw consists of a 62 teeth cutter blade that can cut up to 10 mm in depth. It has a 1.4 kg weight, a 0.3 kW optimal output, a peak free speed of 3000 rpm in addition to a maximum cutter blade diameter of 50 mm.
Circular saw / hand / pneumatic - max. 1.3 kW | LCS 38 S150-D
This pneumatic circular cutter is packed with plenty of cutting power. It has a reliable...
Circular saw / hand / pneumatic - max. 1.3 kW | LCS 38 S150-D
This pneumatic circular cutter is packed with plenty of cutting power. It has a reliable 26 mm cutting depth, and does not require lubrication to fullfil its low maintenance requirement. The cutter blade has a cover that protects both the user and the machine itself. Furthermore, it is also equipped with an integrated dust extraction system.