Label printer-applicator

select brand


Ferplast

Thermal transfer label printer-applicator / automatic - max. 20 p/min | AP775

The AP775 Series, manufactured by Ferplast, is an automatic labeling machine designed...

Thermal transfer label printer-applicator / automatic - max. 20 p/min | AP775

The AP775 Series, manufactured by Ferplast, is an automatic labeling machine designed to put or dispense labels to packages. It has 170 mm maximum width, 104 mm outside diameter, and 254 m/s maximum speed. This is used in a wide range of applications involving pharmaceuticals, cosmetics, gifts, electronics, business and personal.
Label Aire, Inc.

Automatic label printer-applicator / for cardboard boxes - max. 10 p/min | 2138 series

The corner wrap application for light cases, is accomplished by dispensing the 4" x 10" (102 mm x 254 mm) label onto the tamp pad with 5" (127 mm) of the label flagged out over the trailing edge of the pad. The leading 5"...

Automatic label printer-applicator / for cardboard boxes - max. 10 p/min | 2138 series

The corner wrap application for light cases, is accomplished by dispensing the 4" x 10" (102 mm x 254 mm) label onto the tamp pad with 5" (127 mm) of the label flagged out over the trailing edge of the pad. The leading 5" (127 mm) of the label is tamp-blow applied to the trailing side of the case. A clamp and fold station mounted to the conveyor awaits the product down stream. An air cylinder clamp is extended to capture the product while an air cylinder roller applicator completes the corner wrap by extending and laying down the trailing edge of the label.

For heavier cartons, the clamp is merely turned off, and the foam roller is swiveled into a downstream slanted position to extend and fold the label onto the rear panel of the case while the product is moving. The system design for the corner wrap application applies labels at a rate of 10 products per minute, with an accuracy of +/- 1/16" (1.6 mm).

Barcode label printer-applicator / automatic - max. 90 p/min | 2138 series

The print and apply system was specially designed and developed by Aire to meet the challenge of an international copper fitting manufacturer whose requirement was to apply variably printed label to the tops of 12 sizes...

Barcode label printer-applicator / automatic - max. 90 p/min | 2138 series

The print and apply system was specially designed and developed by Aire to meet the challenge of an international copper fitting manufacturer whose requirement was to apply variably printed label to the tops of 12 sizes of fittings that covered elbows, tees, crosses, and couplings. The product measured from 1.5" (38 mm) to 3" (76 mm) in diameter.

The Solution Label Model 2138 Print & Apply applicator is mounted on vertical and horizontal gib slides for precise adjustments. The products are hand loaded onto a 6" (152 mm) wide by 10' (3 m) long conveyor and then aligned in position with adjustable custom guide rails. The bar code labels are printed, applied to the products and then scanned by a Microscan bar code reader. The correctness of the bar-coded product is checked by an air-cylinder ejected onto an eject chute if a match is not verified

Automatic label printer-applicator / triple-sided - max. 60 p/min | 6000 series

The Challenge A leading CD manufacturing company wanted a labeling system which could print-and-apply bar - coded labels to the unhinged edge of CD jewel cases. This company also needed a bar - code scanner to check the barcodes as well as an ejection...

Automatic label printer-applicator / triple-sided - max. 60 p/min | 6000 series

The Challenge A leading CD manufacturing company wanted a labeling system which could print-and-apply bar - coded labels to the unhinged edge of CD jewel cases. This company also needed a bar - code scanner to check the barcodes as well as an ejection system to reroute any wrong bar - codes or no bar - codes. All of this was needed at a fast speed with high reliability. The Solution Label-Aire modified its new Inline Series 6000 open-frame labeling system for print-and apply labeling. The bar - code labels are now put on by the latest 3138-N printer applicator. Because of the combination of the Label-Aire's proven inline conveyor technology and the advanced 3138-N, a fast as well reliable labeling system has been made which the customer wanted for himself. The Label-Aire 3-Panel CD Case Labeling System can now print as well apply labels at a high speed of up to 60 products per minute. The 3-panel application is gained by a pneumatic wipe down station that . . .

Automatic label printer-applicator / for cardboard boxes - max. 305 mm/s | 3038 series

The Model 3038 series with Stepper Tamp is made for printing and labeling of products from various sizes on the same conveyor line which removes positioning adjustments. This product contains...

Automatic label printer-applicator / for cardboard boxes - max. 305 mm/s | 3038 series

The Model 3038 series with Stepper Tamp is made for printing and labeling of products from various sizes on the same conveyor line which removes positioning adjustments. This product contains an improved two-line digital display with full error messaging and user programmable PLC outputs. The 3038 series is also equipped with a standard velocity compensation with alternative encoder. This machine can work accurately with its label placement through the changes in product velocity and multi-page memory. Those features definitely clarify its setting and changeovers. This machine can resist corrosion due to its steel and anodized aluminium design. This construction gives a durability and low-maintenance function for the demanding print and working applications.

Automatic label printer-applicator / double-sided / for cardboard boxes - max. 406 mm/s | 3138-N

The 3138-N, manufactured by Label-Aire® is designed to develop a dual action tamp printer applicator which gives an easy dual panel print and application labeling. Advanced features in its standard 3138-N Printer Applicator...

Automatic label printer-applicator / double-sided / for cardboard boxes - max. 406 mm/s | 3138-N

The 3138-N, manufactured by Label-Aire® is designed to develop a dual action tamp printer applicator which gives an easy dual panel print and application labeling. Advanced features in its standard 3138-N Printer Applicator...
MARCOPACK

Automatic label printer-applicator - max. 200 mm/s, 203 dpi | ECOPRINT 412

Print and apply system for text, barcodes, logos, etc. High benefits with dispenser made in stainless steel...

Automatic label printer-applicator - max. 200 mm/s, 203 dpi | ECOPRINT 412

Print and apply system for text, barcodes, logos, etc. High benefits with dispenser made in stainless steel and the following characteristics:

Print speed........................................ up to 200mm / s
Resolution......................................... 8Dots/mm (203DPI)
Max. paper widht................................ 116mm
Max. print length................................. 1.300mm

Automatic label printer-applicator / high-speed - max. 300 mm/s, 203 - 300 dpi | ST 418

description

Printer technology: TD/TT.
Resolution: 203/300 dpi.
Printer speed: 300 mm/s.
Max...

Automatic label printer-applicator / high-speed - max. 300 mm/s, 203 - 300 dpi | ST 418

description

Printer technology: TD/TT.
Resolution: 203/300 dpi.
Printer speed: 300 mm/s.
Max print width: 128 mm.
Max print length: 1249 mm.
USB: si.
Ethernet: Optional.
Internal rewinder: No.
DRAM: N/D.
FLASH: N/D.
Serial port: RS232.
External diameter labels: 280/400 mm.
International Characters: Si.
Ribbon max width: 131 mm.
Ribbon max length: 650 m.

Barcode label printer-applicator / automatic - max. 200 mm/s, 203 - 300 dpi | ST 612

description
Printer technology: TD/TT.
Resolution: 203/300 dpi.
Printer speed: 200 mm/s.
Max...

Barcode label printer-applicator / automatic - max. 200 mm/s, 203 - 300 dpi | ST 612

description
Printer technology: TD/TT.
Resolution: 203/300 dpi.
Printer speed: 200 mm/s.
Max print width: 152 mm.
Max print length: 1249 mm.
USB: yes.
Ethernet: Optional.
Internal rewinder: No.
DRAM: N/A.
FLASH: N/A.
Serial port: RS232.
External diameter labels: 280 mm.
International Characters: yes.
Ribbon max width: 165 mm.
Ribbon max length: 650 m.
{{item.name}}