Lifting clamps, handling clamps

select brand


Demag Cranes & Components

Beam lifting clamp / for metal sheet

The Load Handling Attacments is a product of brilliance now being offered by DEMAG. It is built to withstand even the most demanding of application or...

Beam lifting clamp / for metal sheet

The Load Handling Attacments is a product of brilliance now being offered by DEMAG. It is built to withstand even the most demanding of application or the harshest of working conditions. Security and precision is of utmost importance in choosing the right load in handling attachments. DEMAG offers a wide variety of load handling attachments that is mostly utilized for sheet and plate metal as well as pallets. It also applied to round and rectangular shaped materials and barrels, not to mention a variety of spreaders and small load magnets. It is designed to cater a wide variety of applications.

Metal sheet lifting clamp / horizontal

This is the best load handling attachment for holding a load safely and efficiently....

Metal sheet lifting clamp / horizontal

This is the best load handling attachment for holding a load safely and efficiently. There are different standard load handling attachments specifically for sheet and metal, pallets, round and rectangular materials and barrel and even for a variety of spreaders and small load magnets. Each product is manufactured in Europe.

Metal sheet lifting clamp / for beams

Grasping of loads is a difficult and risky task. The right load-handling attachment plays...

Metal sheet lifting clamp / for beams

Grasping of loads is a difficult and risky task. The right load-handling attachment plays an important role in the safety and success of any lifting operation.

Demag load handling attachments are available in a wide range for sheet and plate metal, pallets, round and rectangular materials, barrels, small-load magnets, and several other spreaders.
WEIR Oil & Gas

Lifting clamp - ASME B30.20- 2010

Operators can safely lift an iron pipe around a frac site by using the Safety Lifting Clamps. Designed by Weir SPM, the Safety Lifting Clamps replace the procedure of just using slings to lift and transport...

Lifting clamp - ASME B30.20- 2010

Operators can safely lift an iron pipe around a frac site by using the Safety Lifting Clamps. Designed by Weir SPM, the Safety Lifting Clamps replace the procedure of just using slings to lift and transport long lengths of pipe which is very unsafe. The old procedure can cause an increased risk of accidents occurring on site due to unpredictable moving or shifting of iron. Each clamp is certified before shipping as per industry standards.

The Safety Lifting Clamp is an easy to use tool which is used to lift long lengths of pipe safely on site. It achieves this as the lift occurs at the pipe's center of gravity. This makes movement easier, more consistent and extremely safe. The Safety Lifting Clamps are NACE MRO0175 compliant and tested to meet ASME B30.20-2010 standards.
Manuvit

Cylinder lifting clamp

The Gallows manufactured by Manuvit, is a tool for forklift or hoist and...

Cylinder lifting clamp

The Gallows manufactured by Manuvit, is a tool for forklift or hoist and can also be used to lift trucks. It is equipped with a clip that si placed outside the sockets and is used for handling coils. Also, this tool has a horizontal lift roll that is placed on the outer diameter.

Coil lifting clamp - max. 350 kg

The Clamp for vertical lift coils is manufactured by Manuvit, and has a maximum loading capacity...

Coil lifting clamp - max. 350 kg

The Clamp for vertical lift coils is manufactured by Manuvit, and has a maximum loading capacity of 350 kg. It has an inner diameter of 70 - 76 - 120 - 150 mm. The unit is suitable for the LEV 300 and 600 models and also with an overhead hoist.

It allows to make a coil with its vertical axis, and also releases when the load is entirely lowered.

Spool lifting clamp - max. 350 kg, max. ø 720 mm | ROTO-TOURET

The Roto-Touret is designed for lifting and rotating cable drums....

Spool lifting clamp - max. 350 kg, max. ø 720 mm | ROTO-TOURET

The Roto-Touret is designed for lifting and rotating cable drums. It can be used either on the LEV 300-600 stackers or with an overhead hoist. The unit has maximum load, which is at 350 kg and also has a maximum width, which is at 540 mm.

Drum materials handling clamp - max. 350 kg, ø 310 - 600 mm | ROTO-FÛT

The ROTO-FÛT is a handling clamp made specifically for drums. It is able to hold...

Drum materials handling clamp - max. 350 kg, ø 310 - 600 mm | ROTO-FÛT

The ROTO-FÛT is a handling clamp made specifically for drums. It is able to hold...

Drum lifting clamp - max. 350 kg, ø 530 - 650 mm | FP4 AUTO

The Automatic Clamp Drum is especially designed to provide a high quality performance...

Drum lifting clamp - max. 350 kg, ø 530 - 650 mm | FP4 AUTO

The Automatic Clamp Drum is especially designed to provide a high quality performance and functionality for specific and related purposes. The superior quality drum is built with a maximum load of 350 kg and a gripping diameter of 530 - 650 mm. It is mainly used for lifting drums in a vertical position.
{{item.name}}