+7 (812) 645-08-06
Stainless steel hoses
select brand
Stainless steel flexible piping - TF...ex
This is an AZO FlexiTakt-System of a TF type. Closed valves on this device facilitate the removal or fittings of the receiver only when the valves are completely shut. The inflatable seal on...
Stainless steel flexible piping - TF...ex
This is an AZO FlexiTakt-System of a TF type. Closed valves on this device facilitate the removal or fittings of the receiver only when the valves are completely shut. The inflatable seal on this device is then activated. Conveying lines on this device are connected to the clean gas side.
To begin the conveying cycle, the pure air valve and inlet pipes must be opened. After a timed cycle, the conveying procedure will end. Once the vacuum is released and the conveying line is shut, the clean air valve closes. Gravity alone can discharge the product, although inert gases and compressed air are provided as back up where needed. Compressed air inert gas, and also ambient air that has been prepared can be used to clean the filter in this device.
To begin the conveying cycle, the pure air valve and inlet pipes must be opened. After a timed cycle, the conveying procedure will end. Once the vacuum is released and the conveying line is shut, the clean air valve closes. Gravity alone can discharge the product, although inert gases and compressed air are provided as back up where needed. Compressed air inert gas, and also ambient air that has been prepared can be used to clean the filter in this device.
Stainless steel hose / PTFE / medium-pressure / high-temperature - DN 5 - 25, 3/16" - 1", 80 - 264 bar | TF series
Inner diameter : 5 mm - 26 mm
Outer diameter : 5 mm - 27 mm
Working pressure : min 80.0 bar
This hose has been constructed with a smooth, white PTFE (polytetrafluoroethylene) inner layer. The smoothness prevents residue from building up in the hose,...
Outer diameter : 5 mm - 27 mm
Working pressure : min 80.0 bar
This hose has been constructed with a smooth, white PTFE (polytetrafluoroethylene) inner layer. The smoothness prevents residue from building up in the hose,...
Stainless steel hose / PTFE / medium-pressure / high-temperature - DN 5 - 25, 3/16" - 1", 80 - 264 bar | TF series
Inner diameter : 5 mm - 26 mm
Outer diameter : 5 mm - 27 mm
Working pressure : min 80.0 bar
This hose has been constructed with a smooth, white PTFE (polytetrafluoroethylene) inner layer. The smoothness prevents residue from building up in the hose,...
Outer diameter : 5 mm - 27 mm
Working pressure : min 80.0 bar
This hose has been constructed with a smooth, white PTFE (polytetrafluoroethylene) inner layer. The smoothness prevents residue from building up in the hose,...
Stainless steel hose / high-temperature - 1/4" - 2", max. 110 bar | FJ series
Inner diameter : 1.7 mm - 42.6 mm
Outer diameter : 14 mm - 69.6 mm
Working pressure : 31 bar - 110 bar
FJ series hose are suitable for high-temperature, vacuum or general-purpose applications which demands zero permeation. The hose material comes with normal hose size, withstanding working pressures...
Outer diameter : 14 mm - 69.6 mm
Working pressure : 31 bar - 110 bar
FJ series hose are suitable for high-temperature, vacuum or general-purpose applications which demands zero permeation. The hose material comes with normal hose size, withstanding working pressures...
Stainless steel hose / high-temperature - 1/4" - 2", max. 110 bar | FJ series
Inner diameter : 1.7 mm - 42.6 mm
Outer diameter : 14 mm - 69.6 mm
Working pressure : 31 bar - 110 bar
FJ series hose are suitable for high-temperature, vacuum or general-purpose applications which demands zero permeation. The hose material comes with normal hose size, withstanding working pressures...
Outer diameter : 14 mm - 69.6 mm
Working pressure : 31 bar - 110 bar
FJ series hose are suitable for high-temperature, vacuum or general-purpose applications which demands zero permeation. The hose material comes with normal hose size, withstanding working pressures...
High-temperature hose / stainless steel-braided - 1/4", 1 500 psig | FL4PM4PM4-36
Inner diameter : max 3.8 mm
Outer diameter : max 15.0 mm
Working pressure : max 103.0 bar
The Swagelok FL Series - 321 SS Braid suitable for 1200 to 1500 psig....
Outer diameter : max 15.0 mm
Working pressure : max 103.0 bar
The Swagelok FL Series - 321 SS Braid suitable for 1200 to 1500 psig....
High-temperature hose / stainless steel-braided - 1/4", 1 500 psig | FL4PM4PM4-36
The Swagelok FL Series - 321 SS Braid suitable for 1200 to 1500 psig. It is constructed with 316L SS. This convoluted FL hose has a size of 1/4 inch. It has a male NPT connection which is 1/4 inch in size. The length of this product is 36 inches or 91.4 centimeters.
Stainless steel-braided hose - 1/4" | FL4SL4SL4-12
Inner diameter : min 4.0 mm
Outer diameter : max 15.0 mm
Working pressure : max 103.0 bar
Swagelok 316L SS 1/4 in. convoluted (FL) hose...
Outer diameter : max 15.0 mm
Working pressure : max 103.0 bar
Swagelok 316L SS 1/4 in. convoluted (FL) hose...
Stainless steel-braided hose - 1/4" | FL4SL4SL4-12
Swagelok 316L SS 1/4 in. convoluted (FL) hose with a 321 SS braid with 1/4 in. tube fittings has a length of 12 in. (30.5 cm) and a maximum temperature pressure rating of 840 psig.
Stainless steel-braided hose - 3/4", 3 100 psig | FM12PM12PM12-12
Inner diameter : min 13.7 mm
Outer diameter : max 34.3 mm
Working pressure : max 103.0 bar
FM series 316L SS braid and convoluted hose...
Outer diameter : max 34.3 mm
Working pressure : max 103.0 bar
FM series 316L SS braid and convoluted hose...
Stainless steel-braided hose - 3/4", 3 100 psig | FM12PM12PM12-12
FM series 316L SS braid and convoluted hose measures 3/4 in. The male NPT measures 12 in. (30.5 cm) length. Please log on for details on pricing and availability.
Stainless steel hose - 1/4" | NGS4-MM-18
Inner diameter : 6.6 mm
Outer diameter : 16 mm
Working pressure : 344 bar
Swagelok stainless steel NG series static...
Outer diameter : 16 mm
Working pressure : 344 bar
Swagelok stainless steel NG series static...
Stainless steel hose - 1/4" | NGS4-MM-18
Swagelok stainless steel NG series static dissipative single-line conductive core hose is 1/4 inch male NPT, and the hose length is 18 inches.