Conductive level switches

select brand


KROHNE

Conductive level switch - OPTISWITCH 6500 C

Switch for level detection and dry-run protection

:: Optimised sensor geometry, easy to clean
:: Measures products with dielectric constant > 1.5
:: Maintenance-free
:: Small and compact version OPTISWITCH 6600

The OPTISWITCH 6500 and OPTISWITCH 6600 are hygienic level switches for level detection and dry-run protection for liquids and solids. Through its...

Conductive level switch - OPTISWITCH 6500 C

Switch for level detection and dry-run protection

:: Optimised sensor geometry, easy to clean
:: Measures products with dielectric constant > 1.5
:: Maintenance-free
:: Small and compact version OPTISWITCH 6600

The OPTISWITCH 6500 and OPTISWITCH 6600 are hygienic level switches for level detection and dry-run protection for liquids and solids. Through its...

Conductive level switch - LS 72xx series

The level switches are used for level identification and dry run security for fluids with advanced stream geometry accurate exchanging point hygienic establishment.The LS 7000 sensors type...

Conductive level switch - LS 72xx series

The level switches are used for level identification and dry run security for fluids with advanced stream geometry accurate exchanging point hygienic establishment.The LS 7000 sensors type series are utilized for conductive fluids.These sensors transmit electrical safety of the tank product when the cathode comes in contact with the item. The vessel dividers serves as reverse potential. Stump electrodes are available for installation of pipes as well as single or multiple rods for tank installation.The rods are can be coated or made from stainless steel making them resistant from developing form or product. Sensor rods can be reduced without using unique instruments. Electronics can be coordinated in compartments or board rooms.
ENDRESS HAUSER

Conductive level switch / with multiple electrodes - 100 - 4 000 mm, -50 °C ... +150 °C | 11362Z

These probes are perfect for use with corrosive liquids and in plastic vessels. Made with G1 1/2 A parallel or 1 1/2-inch NPG tapered threads plus flanges that...

Conductive level switch / with multiple electrodes - 100 - 4 000 mm, -50 °C ... +150 °C | 11362Z

These probes are perfect for use with corrosive liquids and in plastic vessels. Made with G1 1/2 A parallel or 1 1/2-inch NPG tapered threads plus flanges that have DIN and ANSI standards from DN 40 to 200, PN 16 or 40, ANSI 1 1/2 to 4-inches and 150 to 300 psi, they are very useful.

The EW 11 Z electronic insert may also be added to make the process of monitoring the unit easier to manage when a Nivotester FTW325 unit is added. These are perfect for many hazardous spaces, waste water plants and even in situations where the threat of an overspill may be prevalent, and protect more items and last for years to come.

Conductive level switch / with multiple electrodes - 0.1 - 4 m, -40 °C ... +100 °C | Liquipoint FTW31

The Liquipoint FTW31 offers the possibility for simple and safe point level detection in conductive liquids. It offers numerous measuring possibilities due to multipoint detection (up to 5 rods).

Conductive level switch / with multiple electrodes - 0.25 - 15 m, -40 °C .... +70 °C | Liquipoint FTW32

The Liquipoint T FTW32 by ENDRESS+HAUSER was designed and develop as level switch for multiple point detection in conductive liquids. Made from durable material,...

Conductive level switch / with multiple electrodes - 0.25 - 15 m, -40 °C .... +70 °C | Liquipoint FTW32

The Liquipoint T FTW32 by ENDRESS+HAUSER was designed and develop as level switch for multiple point detection in conductive liquids. Made from durable material, it is equipped with probe that can detect up to 5 level limits, two-point point control for maximum and minimum detection, and electronic insert for separate power supply unit connection. Its very cost effective instrument since it doesn't need any calibration and the Liquipoint doesn't have any movable parts or piece, so installation is easy and needs no costly maintenance. Measuring ranges of Liquipoint can easily be configured from 1 kΩ, 10 kΩ, or 100 kΩ.

Conductive level switch / for the food industry - -20 °C ... +100 °C,max. 25 bar | Liquipoint FTW33

Liquipoint FTW33 was especially made to be used in n pipes and in storage, mixing and process vessels with or without an agitator. This world class technology...

Conductive level switch / for the food industry - -20 °C ... +100 °C,max. 25 bar | Liquipoint FTW33

Liquipoint FTW33 was especially made to be used in n pipes and in storage, mixing and process vessels with or without an agitator. This world class technology was developed for the food industry and meets all the international hygiene requirements. This can be installed easily, even in tight conditions or where access is restricted- all thanks to its very compact design. It also has an LED display for on-site function check and has a robust stainless steel housing available in the M12x1 model. Because of its CIP/SIP, this groundbreaking technology can be cleaned and sterilized in place which very convenient.

Conductive level switch - 11263

Endress+Hauser rod probe is specifically created for conductive limit detection of conductive...

Conductive level switch - 11263

Endress+Hauser rod probe is specifically created for conductive limit detection of conductive liquids in open tanks. This highly flexible and remarkable device has different models- standard applications can opt to have the simple version with 2 standard lengths while the corrosion-resistant rod and insulation is used for moderately aggressive materials.
AFRISO-EURO-INDEX

Conductive level switch - -10 °C ... +60 °C | CoFox ELT 8

The CoFox® ELT 8 conductivity level switch are designed to control filling...

Conductive level switch - -10 °C ... +60 °C | CoFox ELT 8

The CoFox® ELT 8 conductivity level switch are designed to control filling...

Conductive level switch - -10 °C ... +50 °C | CoFox® ELT 500/4

For conductive media such as water,
waste water, emulsions...

Conductive level switch - -10 °C ... +50 °C | CoFox® ELT 500/4

For conductive media such as water,
waste water, emulsions and many more
With visual alarm and Reset button
Relay contact for connection of additional
alarm equipment
Up to 4 zones can be monitored

Conductive level switch - -10 °C ... +60 °C | CoFox® ELT 680

The CoFox® eLT 680 Conductivity level switch, specifically designed for food industry...

Conductive level switch - -10 °C ... +60 °C | CoFox® ELT 680

The CoFox® eLT 680 Conductivity level switch, specifically designed for food industry...
{{item.name}}