+7 (812) 645-08-06
Other accessories for construction equipment
select brand
Steering system Idle / for material handling trucks - 600W0C series
Bonfiglioli has been building idle steering systems for material handling vehicles since decades. These solutions are typically applied in the rear part of 3- and 4-wheel counterbalanced forklifts. They...
Steering system Idle / for material handling trucks - 600W0C series
Bonfiglioli has been building idle steering systems for material handling vehicles since decades. These solutions are typically applied in the rear part of 3- and 4-wheel counterbalanced forklifts. They can be axles or steering units for twin wheels.
Depending on the steering unit model, anti-vibration parts can be included and they serve as support for fixing brackets.
The steering is realized by means of hydraulics that guarantees a high steering angle, in order to minimize the steering radius of the vehicle and allow the truck to move easily inside narrow aisles.
Depending on customer requests, it is possible to customize main dimensions and other characteristics of the units, like the presence of a potentiometer to read out the steering angle.
Depending on the steering unit model, anti-vibration parts can be included and they serve as support for fixing brackets.
The steering is realized by means of hydraulics that guarantees a high steering angle, in order to minimize the steering radius of the vehicle and allow the truck to move easily inside narrow aisles.
Depending on customer requests, it is possible to customize main dimensions and other characteristics of the units, like the presence of a potentiometer to read out the steering angle.
Motor wheel / for tired vehicles - 1 750 - 60 000 Nm, 5.8:1 - 153:1 | 600 series
The 600 - Wheel drive, engineered by Bonfiglioli, features an optional disengagement...
Motor wheel / for tired vehicles - 1 750 - 60 000 Nm, 5.8:1 - 153:1 | 600 series
The 600 - Wheel drive, engineered by Bonfiglioli, features an optional disengagement device that tows the vehicle in an emergency. This device runs on a torque range of 1.750 to 60.000 Nm with a gear ratio of 5.8 to 153. Moreover, it offers a rugged design consisting of Duo-cone seals.
Down the hole hammer - ø 97.8 - 126 mm | RH460 series
This is the RH460 DTH hammers manufactured by Sandvik. This set of tools composed of a DTH hammers...
Down the hole hammer - ø 97.8 - 126 mm | RH460 series
This is the RH460 DTH hammers manufactured by Sandvik. This set of tools composed of a DTH hammers and a drill bits which are made to function hand in hand. These two ensure that they will give a unified superior penetration rates having a durable and low operating cost. On the other hand, the RH550-series hammers are suitable for maximizing impact-energy transmission on rocks.
Down the hole hammer - ø 81.3 - 181 mm | RH550 series
The extensive RH460 family is consisted of 4 standard size hammers with dimensions...
Down the hole hammer - ø 81.3 - 181 mm | RH550 series
The extensive RH460 family is consisted of 4 standard size hammers with dimensions ranging from 4" to 8". The 4", 5" and 5"G variations are also offered. Meanwhile, the 6" and 8" will be available in 2014. RH460 Hammers are engineered to employ the bits using available shanks in the industry.
Down-the-hole drill bit - 90 - 762 mm
The DTH Drill Bits are designed for a wide range of Sandvik DTH hammers...
Down-the-hole drill bit - 90 - 762 mm
The DTH Drill Bits are designed for a wide range of Sandvik DTH hammers of hammers of other brands. It is equipped with high-grade cemented carbide buttons which includes grade XT48. For maximum efficiency and durabilty, the bits are offered in various designs.
Down the hole hammer casing system - ø 139.7 - 193.7 mm | CDC series
Sandvik has introduced this CDC system for installing cases in natural formations and many types of overburdens. They can easily penetrate boulders as they make straight...
Down the hole hammer casing system - ø 139.7 - 193.7 mm | CDC series
Sandvik has introduced this CDC system for installing cases in natural formations and many types of overburdens. They can easily penetrate boulders as they make straight holes. They are designed to be used with permanent cases that undergo welding at the time of drilling and is then left in the hole. It is good to use for drilling and casing deeper holes as per the applications, conditions of the ground and the inclination of the hole. It has got assembly of ring bit and pilot bit in it. Casing shoe and the ring bit are connected with each other using a rotary joint. These components along with casings, drill pipes and DTH hammer make the system complete.
Down the hole hammer casing system - ø 102 - 327 mm | TUBEX XL series
The Tubex XL - tool systems are designed for use with DTH hammers. They perform casing and drilling simultaneously through overburdens....
Down the hole hammer casing system - ø 102 - 327 mm | TUBEX XL series
The Tubex XL - tool systems are designed for use with DTH hammers. They perform casing and drilling simultaneously through overburdens. They perform excellently well and make the operations highly effective. Once when the needed depth or the bedrock is reached, the drill string is easily removed from the hole and also leaves the case in the right place. There are various types of this tool available with different features. You can make use of the product table to choose the tool that suits your need.
Grab extension - max. 2 m | VL series
The VL sereis, manufactured by Sennebogen, are grab extensions that have a standard...
Grab extension - max. 2 m | VL series
The VL sereis, manufactured by Sennebogen, are grab extensions that have a standard system, simple and quick mounting capabilities. They have an extension range of 1.0 - 2.0 m and are capable of accommodating weights of up to 510 kg. Furthermore, the product have a simple and cost-efficient height compensation.